VISUAL Operations
English
Owner’s manual
This function is available when a VTR, etc. is connected to the visual 1 or visual 2 terminal.
∗The visual 1 mode is not available when a DVD changer is connected to the visual 1.
WARNING
For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and op- erating the VTR, etc. while driving are pro- hibited by law in some countries.
Switching to the VISUAL mode
Notes:
•For your safety, the VRX935VD has a safety func- tion which turns off the picture when the car is moving, so only the audio can be heard. The pic- ture can only be watched when the car is stopped and the parking break is applied.
1.Press the [FUNC] buton and select the VI- SUAL mode.
2.Press the [BAND] button to select the VI- SUAL1 or VISUAL2.
Switching the VTR system between NTSC and PAL
∗This function is enabled only when the panel is open.
Switch to the VISUAL/VTR in TV mode you use.
1.Press the [ADJ] button to switch to the AD- JUST MODE menu.
2.Touch the [NTSC/PAL] key, [NTSC] key and [PAL] key appears in the display.
3.Touch the [NTSC] key or [PAL] key to select “NTSC” or “PAL”.
adjust BRIGHT, HUE and COLOR.
●“BRIGHT”:
Adjust the brightness of the display.
●“HUE”:
Adjust the tone of color (red is emphasized or green is emphasized)
•This operation is available only when the car is stopped and the parking brake is applied.
●“COLOR”:
Adjust the color saturation.
•This operation is available only when the car is stopped and the parking brake is applied.
3.Operate the touch key to adjust a level.
● “BRIGHT”:
● “HUE”:
[R] key or [G] key
● “COLOR”:
4.When adjustment is made, touch the [RTN] key to return to the ADJUST MODE menu.
Touch the [RTN] key again to return to the STANDARD screen.
∗ To return from the adjust a level display to the STANDARD screen, press the [ADJ] button once again.
Changing over monitor display size
∗This function is available only when the panel is open.
Note
•This function is not available while you are driv- ing.
•Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see.
Adjusting the brightness and tone of color
Notes:
•This function is not available when the display is stored.
•The HUE setting can be adjusted only when the NTSC mode is selected.
•Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see.
1.Press the [ADJ] button to switch to the AD- JUST MODE menu.
2.Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch the [BRIGHT], [HUE] and [COLOR] key to
1.Press the [DISP] button for 1 second or longer to change over the monitor display size. Each time you press the [DISP] button, the monitor display size changes in the fol- lowing order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CINEMA” ➜ “NORMAL”
● “NORMAL”: (normal display)
There is a black area at both right and left ends of a display. In case of normal TV broadcasting (4:3), the image can be shown without being cut or deformed.
42 VRX935VD
