VS715
STAND ALONE DIGITAL MEDIA PLAYER24S
PECIFICATIONS
General Specifications
Power Requirement: 14.4 V DC (10.8 to 15.6 allow.)
Current Consumption: less than 3.0 A
Weight: 3.5 lbs. (1.6 kg)
Dimensions (w x h x d): 7.0 x 2.0 x 6-5/8 in.
(178 x 50 x 165 mm)
DVD Deck Specifications
Format: DVD-Video Disc (2 Layer, 2 side)
Compact Disc
Video System: Standard NTSC
Audio System: MP3 I, MP3 II
Loading System: 8 cm or 12cm Disc Direct Loading
Mounting Angle: 0 to +/- 30°
Video Specifications
Video System 4:3 Letter Box and 4:3 Pan Scan
Video Output level: 1.0 Vp-p 75 Ohms
Horizontal Resolution: 500
Video Input terminal: 0.5 to 2.0 Vp-p 75 ohms
Audio Specifications
Maximum Output: 308 mV rms (+/- 3dB)
Frequency Response: 20 to 20 kHz
S/N Ratio (A-wtd): 100 dB
Separation: 80 dB
Supplied Accessories: VS715 disc unit, IR Remote Control, (2) AAA
Alkaline Batteries, 4-pin Power Supply
Harness, Trim Bazel, DIN Mounting Sleeve,
Backstrap, (4) M5x6 Counter Sunk Machine
Screws, (4) M5x10 Phillips Head Self-tapping
Screws, (2) Installation Brackets, 5 Meter RCA
A/V Cable, Owner’s/Installation Manual,
Warranty Card.
FCC S
TATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be verified by turning the unit off and on, the user is encouraged
to consult the dealer or an experienced radio/television technician for help.
VS715OMRev0.qxd 1/25/01 4:19 PM Page 24