Technical Specifications - Precision 6 iDP
System (Master & Slaves) |
|
System | |
Frequency Response (1) | 56Hz – 51kHz (+/- 2dB) |
Max. SPL (@ 1m) (2) | 117dB (continuous) |
Dispersion | 90 degrees |
Crossover Frequency | 1.9kHz (DSP generated) & 16kHz (passive) |
Drive units | 165mm (6") Tannoy Dual Concentric™ constant directivity driver with |
| multiple fibre paper pulp cone. |
| 25mm (1") titanium dome Wideband™ SuperTweeter™ |
| Neodymium magnet system |
Cabinet LF Alignment | Optimised bass reflex loaded |
Dimensions (H x W x D) | 356mm x 220mm x 369mm (14” x 85/8” x 141/2”) |
Cabinet Construction | MDF cabinet and front baffle, tongue and groove front and back |
| Black cabinet Grey painted baffle with brushed aluminium inlay |
| Black anodized aluminum back plate |
Total weight | 12 kg (26.4lbs) |
Electronic System |
|
Mains | Voltage 100 to 240Vac, 50 – 60Hz (auto – select) |
Power Consumption | 45W @ 1/8 full power (IEC 6065) |
Amplifier | Bass/midrange – 200 Watts Class D |
| Tweeter & SuperTweeter™ – 200 Watts Class D |
System Sample Rates: |
|
Internal | 96 kHz (except when slaved to digital input or word clock input) |
External | 96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz) |
Digital Section (Master only): |
|
I/O connectors | XLR (2 channels AES/EBU in). 3 x RJ45 proprietary TC LINK |
Formats | AES\EBU |
Word Clock | Input BNC, 75 , 0.6 to 10 Vpp |
Display | 2 x 16 character dot matrix |
Operation | Menu system / four buttons |
Analogue Section (Master only): |
|
Input connectors | XLR balanced (pin 2+, pin |
Impedance | 10/3 k (balanced/unbalanced) |
Selectable Full Scale Input level | +9, +15, +21, +27 dBu |
Dynamic Range | > 113 dB typ. (unweighted), BW: |
THD+N | < |
< | |
A to D Conversion | 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1MHz) |
Slaves Only: |
|
I/O connector’s | 2 x RJ45 proprietary TC LINK |
The typical listening distance for Precision 6 iDP is
The typical room size for Precision 6 iDP is
NOTES
(1)+/- 3 dB, measured at 1m in an anechoic chamber. (2) Peak SPL at mix position for 1 pair driven.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published
specifications which Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications. | 43 |
|
