Technical Specifications - TS212 iDP™ & TS112 iDP™ Subwoofer & iDP™ Remote
Technical Specifications | TS212 iDP™ Subwoofer |
System | Active Subwoofer |
Frequency Response | 25Hz – 150Hz (+/- 3dB) |
Max. SPL (@ 1m) | 124dB (continuous) |
Crossover Frequency | Set in bass management (DSP Generated) |
Drive units | 2 x 300mm (12") Aluminium Cone |
Cabinet Volume/LF Alignment | 45 Litres/Infinite baffle |
Dimensions (H x W x D) | 520mm x 471mm x 497mm |
| (201/2” x 185/8” x 195/8”) |
Cabinet Construction | MDF |
| Gray suede paint finish on top with silver insert |
| Black Fabric on sides |
| Black anodised aluminium back plate |
Total weight | 51kg (112.2lbs) |
Electronic System |
|
Mains Voltage | 115 or 230Vac, 50 – 60Hz (switchable) |
Power Consumption | 45W @ 1/8 Full Power (IEC 60065) |
Amplifier | 1500 W PWM amp |
System Sample Rates: |
|
Internal | 96 kHz (except when slaved to digital input |
| or word clock input) |
External | 96, 88.2, 64, 48, 44.1 or 32 kHz |
| (optional 192kHz) |
Digital Section (Slave only): |
|
I/O connectors | 2 x RJ45 proprietary TC LINK |
Dynamic Range | > 113 dB typ. (unweighted) |
THD+N | < |
< | |
A to D Conversion | 24 bit (Dual bit delta sigma sampling at |
| 4.1/5.6/6.1/6.1 MHz) |
TS112 iDP™ Subwoofer & iDP™
Active Subwoofer 25Hz – 150Hz (+/- 3dB) 118dB (continuous)
Set in bass management (DSP Generated) 1 x 300mm (12") Aluminium Cone
22 Litres/Infinite baffle 384mm x 366mm x 398mm (151/8” x 143/8” x 155/8”)
MDF
Gray suede paint finish.
Black anodised aluminium back plate.
25kg (55lbs)
115 or 230Vac, 50 – 60Hz (switchable)
45W @ 1/8 Full Power (IEC 60065)
750 W PWM amp
96 kHz (except when slaved to digital input or word clock Input)
96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz)
2 x RJ45 proprietary TC LINK > 113 dB typ. (unweighted)
<
<
24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
45
