Radio Operations

Preset Scan

The Preset Scan receives the stations stored in the preset memory in order. This function is useful when searching for the desired station in memory.

1.Touch the [Band] key to select the desired band. (FM or AM).

2.Touch the [List] key to display the Preset List screen.

3.Touch the [PS] key to start the Preset Scan. The unit starts scanning each station for 10 seconds sequentially. Presets with a weak signal will be skipped.

4.When the desired station is tuned in, touch the [PS] key again to continue receiving that station.

LOC/DX Setting

The DX / LOC setting changes the tuner sensitivity in order to separate closely spaced stations. This feature is useful in areas that have many radio stations in close proximity.

1.Touch the [List] key to display the Preset List screen.

2.Touch the [DX] key to switch to DX tuner sensitivity.

3.Touch the [LOC] key to switch to Local tuner sensitivity.

EnglishEnglish

Manual Owner’s

DVD Video Player Operations

Change DVD System Settings

Note:

If the set up operation is performed in the middle of DVD video play, the disc will restart from the beginning.

Selecting DVD Set Up Menu

1.Touch the [Settings] key on the Main Menu to access the Video set up menu.

2.Touch the [Video] key. The video menu is displayed.

•When watching a wide type through a wide type of the rear view monitor (16:9),

the leftmost and rightmost areas of the screen are not cut off.

Setting up the Video System Format
Setting up the Screen Size

1.Touch the [Aspect Ratio] key in the Video sub menu to change the screen size.

2.Touch the desired aspect ratio: 4:3 or 16:9.

The factory default setting is “ 16:9 ”.

•When watching a wide type through a conventional type of the rear view monitor (4:3), the leftmost and rightmost areas of the screen are cut off.

This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned (scrolled).

1.Touch the [Aux IN] key in the Video sub menu to set up the video system format.

2.Touch the required format : Auto, PAL or

NTSC.

The default setting is Auto.

Setting up the AUX Input Sensitivity

1.Touch the [AUX Input SW] key in the Video sub menu to set up the sensitivity level.

2.Touch the desired sensitivity level displayed: Low, Mid or High.

The default setting is Mid.

VX401/VZ401 21