Manual Owner’s English

8. TROUBLESHOOTING

GENERAL

ProblemCauseMeasure

Power does not turn on. (No sound

Fuse is blown.

Replace with a fuse of the same

is produced.)

 

amperage. If the fuse blows again,

 

 

consult your store of purchase.

 

 

 

 

Incorrect wiring.

Consult your installation center.

 

 

 

Nothing happens when buttons are

The microprocessor has malfunc-

Press the reset button with a thin

pressed.

tioned due to noise, etc.

rod.

Display is not accurate.

 

Note:

 

When the Reset button is pressed,

 

 

turn off the ACC power.

 

 

* When the Reset button is

 

 

pressed, frequencies of radio sta-

 

 

tions, titles, etc. stored in memory

 

 

are cleared.

 

 

 

The remote control unit does not

Direct rays of the sun fall on the

When direct rays of the sun fall

work.

light-receptive part of the remote

on the light-receptive part of the re-

 

control unit.

mote control unit, it may not work.

 

 

 

 

The battery of the remote control

Check the battery of the remote

 

unit is dead or there is no battery in

control unit.

 

the remote control unit.

 

 

 

 

DVD PLAYER

Problem

Cause

Measure

Disc cannot be loaded.

A disc is already loaded.

Eject the disc before loading the

 

 

new one.

 

 

 

 

There is foreign matter already in

Remove the foreign matter, or

 

the disc slot.

consult a service station.

 

 

 

Sound skips or is noisy.

Disc is dirty.

Clean the disc with a soft cloth.

 

 

 

 

Disc is heavily scratched or

Replace with a disc in good condi-

 

warped.

tion.

 

 

 

Sound is bad directly after power is

Condensation may form on the

Let dry for about 1 hour with the

turned on.

internal lens when the car is parked

power on.

 

in a humid place.

 

 

 

 

Video images are not displayed.

The parking brake is not engaged.

Check that the parking brake is

 

 

engaged.

 

 

 

Disc cannot play with the

Feature exceeds set parental level.

Release the view limitation or

display “PARENTAL VIOLATION

 

change the parental level.

shown.

 

See the subsection “Setting up the

 

 

parental level”

 

 

 

42VX401/VZ401