English

Installing the Main Unit in TOYOTA Vehicle

Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)

Manual Owner’s

Center Panel (* 2 )

Main Unit

* 3

8- Hexagonal screws

8-Hexagonal screw (M5x8)

(M5 8)

Mounting bracket Mounting bracket

(1 pair for the left

(1 pair for the left and right sides)

and right sides)

Figure7 7

*2 Some panel openings are too small for the

unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about

0.5to 1.5 mm so the unit can be inserted smoothly.

*3 If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or similar tool.

Typical Mounting Brackets
Example 1

Example 2

Example 3

Affix the screws to the marks.

Vehicles other than NISSAN and TOYOTA

In some cases the center panel may require modification. (Trimming, filing, etc.)

• Removing the Main Unit

When the main unit is to be removed, disassemble it in the reverse of the order in

“INSTALLING THE MAIN UNIT”.

50VX401/VZ401