6. OPERATIONS

Basic Operations

English

Note:

•Be sure to read this chapter referring to the chapter “3. CONTROLS”

CAUTION

When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.

Turning ON and OFF the Power

Note:

•Start the engine before using this unit.

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Start the engine. The power button illumination on the unit will light up.

2. Press the [ SRC] button on the unit to turn ON the power. Or press the [SRC/POWER] button on the remote control to turn ON the power.

3. To turn OFF the power, press and hold the [ SRC] power button on the unit for more than 2 seconds. Or press the [SRC/POWER] button on the remote control to turn OFF the power for more than 1 seconds.

Engine ON position

Opening and Closing Operational Panel

Press [OPEN] button on the unit (VZ401E). The operational panel will be open.

Press the same button again to close the panel.

CAUTION

•Do not move the operation panel forcibly or apply strong force to the operation panel.

•When the operation panel is operating, be careful not to get your hand or finger caught between the operation panel and main unit or its mechanical parts.

•The driver should not operate the operation panel while driving.

Adjusting the Angle of the Operational Panel

Touch the settings key to enter into the Monitor Adjust to adjust the desired angle (VZ401E).

Selecting a Mode

1.Touch the desired source key you wish to change to: Tuner, Disc, USB, AUX IN, AV IN, iPod/iPhone, etc.

*External equipment not connected to this unit is not displayed.

Manual Owner’s

Touch the [10:00] to display the time.

2. Press the [ ] SRC button to scroll through the available sources.

VX401E/VZ401E 17