Installing the Main Unit in TOYOTA Vehicle

Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)

manual Installation English

Main Unit

Center Panel

 

(*2)

*3

 

8- Hexagonal screws (M5x8)

Mounting bracket (1 pair for the left and right sides)

Figure 7

*2 Some panel openings are too small for the

*3 If a hook on the installation bracket

unit depending on the vehicle type and

interferes with the unit, bend and flatten it

model. In such a case, trim the upper and

with a nipper or similar tool.

lower sides of the panel frame by about

 

0.5 to 1.5 mm so the unit can be inserted

 

smoothly.

 

Typical Mounting Brackets
Example 1

Example 2

Example 3

Affix the screws to the marks.

Vehicles other than NISSAN and TOYOTA

In some cases the center panel may require modification. (Trimming, filing, etc.)

• Removing the Main Unit

When the main unit is to be removed, disassemble it in the reverse of the order in

“INSTALLING THE MAIN UNIT”.

VX401E/VZ401E 49