Manual Owner’s English
9. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD PLAYER
Display | Cause | Measure |
BAD DISC | A disc is caught inside the | This is a failure of DVD deck’s |
| DVD deck and is not ejected. | mechanism and consult your |
|
| store of purchase. |
|
|
|
BAD DISC | A disc cannot be played due | Replace with a |
| to scratches, etc. | |
|
|
|
BAD DISC | A disc is loaded upside- down | Eject the disc then reload it |
| inside the DVD deck and does | properly. |
| not play. |
|
|
|
|
PARENTAL VIOLATION | Parental level error | Set the correct Parental level. |
|
|
|
Disc Region incorrect | Region code error | Eject the disc, and replace |
|
| correct region code disc. |
|
|
|
If an error display other than the ones described above appears, press the Reset button. If the problem persists, turn off the power and consult your store of purchase.
*When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.
10. SPECIFICATIONS
Frequency Range: 87.5 MHz to 108 MHz
Usable Sensitivity: 8 dBµV
50dB Quieting Sensitivity: 14 dBµV
Alternate Channel Selectivity: 70 dB
Stereo Separation: 25 dB (1 kHz)
Frequency Response: 30 Hz to 15kHz
AM TunerFrequency Range: 531 kHz to 1602 kHz
Usable Sensitivity: 28 dBµV
DVD Player SystemDigital Versatile Disc System with CDDA capable
Usable discs:
DVD video disc, Compact disc
Frequency Response: 20 Hz to 20 kHz
Sound/Noise Ratio: 87 dbA (1W Ref)
Dynamic Range: 87 dB (1 kHz)
Distortion: 0.05%
Audio/Video InputAudio input voltage: ≤ 2 Vrms
Video input voltage: 1.0
High: 300mVrms
Mid: 600mVrms
Low: 1.3Vrms
Audio/Video outputVideo output voltage:
44VX401E/VZ401E