manual Installation English

Connecting the parking brake cord

Connect the cord to parking brake lamp ground in the meter panel.

Note:

•Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV input when the parking brake is engaged.

•When the parking brake cord is not connected, the monitor will not show any video sources.

•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.

Parking brake lamp

cord to battery

Parking brake

Electro-tap

Parking brake signal cord

Parking brake cord (Grass-green)

How to attach the electro-tap

1.Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow

2.Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.

Parking brake

signal cordParking brake signal cord

Stopper

Parking brake cord (Grass-green)

Connecting the accessories•Connecting to the external amplifier

The external amplifiers can be connected to the 6 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the unit.

•Connecting to iPod/iPhone device

The iPod/iPhone device can be connected to dedicated iPod/iPhone connection on the main unit. For detailed information, refer to the instruction sheet or manual for the iPod/ iPhone cable.

Note:

•This unit may not support all functions of all iPod/iPhone devices.

•The iPod/ iPhone connection will charge your iPod/iPhone unless the iPod/iPhone battery is completely depleted. If the specified cord of the cellular phone is connected to the phone interrupt cord of the main unit, the audio mute is activated when cellular phone in use.

54VX401E/VZ401E