6.WIRED REMOTE CONTROL UNIT OPERATIONS
■XMA2 following operations are enabled by remote control with the Wired Remote Control Unit M101RC (sold separately).
WIRED REMOTE CONTROL UNIT | 1PWR (Power) Button |
| ||
|
| FUNC (Function) Button |
| |
| 2VOLUME Up (w) / Down (z) Buttons | |||
| 3BAND Button [ | ] |
| |
| 4Play/Pause (s) Button [ | ], | ||
|
| MUTE Button [ | ] |
|
| 5SEARCH Up( | ) / Down ( | ) Buttons | |
| [ | ] : In Radio Mode |
| |
| [ | ] : In Tape Mode |
| |
CAUTION
Be careful about adjusting the volume, as turning on the power while the volume is raised to its maximum may harm your hear- ing.
PWR / FUNC Button 1
Turning on and off the power
Press the PWR button 1 to turn the power on and press and hold it for 1 second or longer to turn the power off.
Changing the operation mode
Each time the FUNC button 1 is pressed, the mode switches in the following order:
Radio 
Tape
Note:
•In tape mode, if no cassette tape is loaded in XMA2, “CASS” flashes on the display and the radio mode is selected.
SEARCH Up ( ) / Down ( | ) Buttons 5 |
Note: |
|
• In tape mode, the SEARCH UP ( | )/DOWN ( ) button on the re- |
mote controller is inoperative. |
|
Changing preset stations (in the Radio mode)
Each time the SEARCH Up/Down buttons 5 are pressed, the pre-
set station switches in the following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
or
6 ➜ 5 ➜ 4 ➜ 3 ➜ 2 ➜ 1 ➜ 6.....
VOLUME Up (w) / Down ( z) Buttons 2
Adjusting the volume
Press the VOLUME Up button 2 to increase the volume and press the VOLUME Down button 2 to decrease the volume.
BAND Button 3
Note:
•In tape mode, the BAND Button on the remote controller is inop- erative.
Changing the band (in the Radio mode)
Each time the BAND button 3 is pressed, the band switches in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1.....
Play/Pause ( s) / MUTE Button 4
Pause (in Tape mode)
Press the Play/Pause button 4. Playback pauses. To resume play- back, press the Play/Pause button 4 again.
Mute (in Radio mode)
Press the MUTE button 4. The sound is muted immediately. To can- cel, press the MUTE button 4 again.
4 XMA2
