Installing Your Phone

2

 

Before You Begin

 

 

 

 

 

Before You Begin

Before you install and connect your phone, verify with your System Administrator (if applicable) that the network is ready for the phone, read the safety notices, and make sure you have all the phone parts and documentation available.

NOTE: The RJ-11 port marked “AUX” is reserved for connection with the Cisco SPA 500S Attendant Console that works with the Cisco SPA 525G. It is not for use as a telephone line port.

!

CAUTION: Do not plug a telephone line cord

into the port marked “AUX.”

 

Connecting the Handset

STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone base in the slot marked with a phone symbol. This port is labeled #5 on the Cisco SPA 525G IP Phone Connections graphic.

STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset (not shown).

Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide

21

Page 24
Image 24
Cisco Systems SPA 525G manual Before You Begin, Connecting the Handset