Installing Your Phone

2

 

Connecting Your Phone to the Computer Network

 

 

 

 

 

Connecting Your Phone to the Computer Network

Connecting Your Phone to the Wired Network

You connect your phone to the local network by using an Ethernet cable:

STEP 1 Plug the Ethernet cable into the back of the base station into the slot marked “SW.” This port is labeled #4 on Figure 1 on page 22.

STEP 2 Plug the other end of the Ethernet cable into the appropriate device on your network, such as a network switch.

NOTE: The Cisco SPA 525G provides a second Ethernet port. You can connect a PC to this port to provide network access to the PC. This port is labeled #3 in the Cisco SPA 525G IP Phone Connections graphic. This port cannot be used when the phone is connected to the network via the built-in Wireless-G client.

Connecting Your Phone to the Wireless Network

NOTE The PC port is not supported in wireless operation. The PC port is only supported in a wired operation.

Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide

27

Page 30
Image 30
Cisco Systems SPA 525G manual Connecting Your Phone to the Computer Network, Connecting Your Phone to the Wired Network