Clarity AL10 manual Operations, SOUND a.ALL, b. MAIN, c. OFF, Motion Sensor Light

Operations

4.SOUND a.ALL

Slide the MIC switch to the ALL position.The sound indicator light and sidebar lights illuminate when continuous sound is detected for 12 seconds or longer in the room by the built-in microphone.After another 10 second delay, the lamp will flash on for one second, off for one second, on again for one second and repeat until two minutes have passed; the bed shaker will also vibrate while the lamp flashes.

b. MAIN

The light indicates the presence of sound, but it will not trigger the lamp to begin flashing or any other indicator.

c. OFF

The sound indicator light and the monitoring function are disabled.

NOTE:The sound indicator light illumination function is also activated when a signal is received from the optional Baby Sound Monitor (AMBX). The position of the MIC switch is irrelevant – AMBX activates the sound indicator light regardless of the position of the MIC switch.

PHONE	DOOR
CLOCK	SOUND
ALARM	MOTION
	AlertMaster

Operations

	E
5.ALARM	N
	G
You must purchase the optional Audio Alarm Transmitter (Model AMAX)	L
from Clarity to use this function.When a signal is received from the	I
	S
Audio Alarm Transmitter, the indicator light illuminates, and the lamp will
	H
turn on for five seconds, off for two seconds, on again for two seconds
and repeat until two minutes have passed; the bed shaker will also
vibrate while the lamp flashes.

PHONE	DOOR
CLOCK	SOUND
ALARM	MOTION
	AlertMaster

6. MOTION SENSOR LIGHT

You must purchase the optional Motion Sensor (Model AMSX) from Clarity to use this function.When a signal is received from the Motion Sensor, the indicator light illuminates, and the lamp will turn on for one second, off for one second and repeat until two minutes have passed; the bed shaker will also vibrate while the lamp flashes.

13 14