Operations |
|
PHONE | DOOR |
CLOCK | SOUND |
ALARM | MOTION |
| AlertMaster |
B. Master Reset
If you have several AlertMaster system components (such as the AL10, the AL11 or the AL12), you can save time by using the AL10 to reset all of them at once (master reset).To do this, press the RESET / PAGE button.
C. Notification Priority
If the AlertMaster system receives two notification signals at the same time, it will display the highest priority signal. For example, if it receives a Motion Sensor signal right after it receives a Phone signal, the indicator will change from PHONE to SENSOR.The priority for each notification signal is shown as follows:
Operations
| E | |
1. Master Reset | N | |
G | ||
2. Motion Sensor | ||
L | ||
3.Audio Alarm | ||
I | ||
4. Baby Sound | ||
S | ||
5. Room Sound | ||
H | ||
6. Phone | ||
| ||
7. Door |
| |
8. Paging |
| |
9.Alarm Clock |
| |
10. Random (Security) Timer |
|
D. Security Timer
With this feature, the lamp connected to your AlertMaster system will go on automatically every evening and turn off later in the evening.You can use this to make it look like someone is home.The light will turn on and off at slightly different times each evening so it is not so obvious that a timer is being used.
To activate this feature:
1.Press the TIMER ON / OFF button once.The lamp will automatically go on every evening at about 5 PM and turn off at about 11 PM.To confirm this setting, the clock
will blink twice every five seconds.
a.If you want the light to turn on at about 6 PM, press SET TIMER once for two seconds or more.To confirm this setting, the clock will blink three times every five seconds.
b.If you want the light to turn on at about 7 PM, press SET TIMER twice for two seconds or more.To confirm this setting, the clock will blink four times
every five seconds.
15 | 16 |
