TELEPHONE OPERATIONS
Figure 9
BOOST
|
| VOLUME |
2 | 3 | 4 |
Figure 10
Placing a Call
1.Lift the handset and dial the number you wish to call.
2.Press the BOOST button and turn the Clarity Power slider to adjust volume.The BOOST button will illumi- nate to indicate amplification is on.
Receiving a Call
When a call is received, the audible ringer will sound and the visual ringer will flash to alert you of an incoming call. To answer the call, lift the handset.
FEATURES
Memory Storage
Phone numbers can be stored into the phones memory to enable one button dialing.The phone directory allows space for twelve (12) different phone numbers. One space is marked to be used to store an emergency number.
See Figure 9.
It is important to not store 911 into your phone.
This will prevent inadvertently calling an emergency call center. Only store emergency numbers such as a doctor, hospital, the local fire department or local police station numbers.
Adding a Memory Location
1.Pick up the handset.
2.Press the PROG button. See Figure 10.
3.Enter the telephone number you wish to store.
4.Press the PROG button.
5.Press the desired memory location (M1- M11 and Emergency) to store the number to.
6.Place the handset back in the cradle.
Note: No audio notification will occur after the number has been stored properly.
To change a Memory Location, reprogram using the same procedure with the button to be changed.
13
