Clarity D702HS How To Deregister Your Handsets, Then press # on handset, Press FIND on base 4 sec

HOW TO DEREGISTER YOUR HANDSET(S)

•Then press # on handset.

4.To register the handset(s) to the telephone base again, follow the registration instructions in section Register a handset.

NOTE: There are no visual or audible alerts to indicate the base is under deregistration mode.

If the base of your main unit is represented by the drawing below, follow the directions below the drawing:

1.Press and hold FIND on the telephone base for about 10 seconds, until the SPEAKER light starts flashing; release FIND.

2.Immediately press FIND again; you will hear two quick beep tones.

3.When complete, the handset screen alternately shows

•Press FIND on base 4 sec

and

•Then press # on handset.

4.To register the handset(s) to the telephone base again, follow the registration instructions in section Register a handset.

HOW TO DEREGISTER YOUR HANDSET(S)

Note:

•If the deregistration process is not successful, you might need to reset the system and try again.To reset, unplug the power from the telephone base and plug it back in.

•You cannot deregister the handset(s) if any system handset is in use.

Note:

•If your handset is registered to a base, you can re-register it to a different base without deregistering it from the original base. Just follow the directions in the section How to add (register) your handset to the main unit (sold separately).

10 11