JVC SR-W5U Adjustment of Playback Picture, To correct distortion of the picture, Pause/Still

6 PLAYBACK

Adjustment of Playback Picture

Y/C TIMING TRACKING –/+

AUTO

PHONES	VOLUME		REC LEVEL	IR REMOTE
			MANUAL	OFF
			AUTO	ON
	MIN	MAX		EDIT(HD REC)
	REMOTE
			NR(W-VHS PLAY)
		PAUSE		TRACKING	AUTO
			INPUT	ON
			LINE4	OFF
VIDEO		L– AUDIO –R		Y/C TIMING
				R
				C
				L

OPERATE	HI-FI AUDIO		AUDIO OUT
	SELECT		SELECT
	BALANCE	REC LEVEL
EJECT
L	R	0	10

REV

JOG

SHUTTLE

	OPERATE		HD	SD	S-VHS	IN — R.A.E. — OUT
								HD INPUT	R.A.EDIT
629	INDEX					INDEX SEARCH	INPUT
TBC	MARK	ERASE		REW	FF		SELECT	PREROLL EDIT	IN/OUT
						INSERT A.DUB
								START
COUNTER	COUNTER	ZERO		STOP	PLAY	PAUSE/STIL			START
/REMAIN	RESET	SEARCH					SP/EP
						REC		PAUSE

FWD

629 TBC PAUSE/STILL

To correct distortion of the picture

Press the 629TBC button to display " (TBC ON)" on the front panel display window.

●Every press of the button changes the display, (ON) [

(OFF) alternately.

●Depending on the type of signal recorded on the tape, the playback picture may not be clearly visible. In that case, the picture may be better by setting to "OFF".

●When playing back a W-VHS tape, TBC for W-VHS works regardless of the "ON" or "OFF" setting.

This facility is helpful for the following occasions.

•Tape recorded with a camcorder.

•Tape used repeatedly.

•When using this unit as a playback machine during dubbing.

When there is too much noise in the playback picture

When auto tracking of this unit is not effective, adjust the tracking manually.

1.Press the AUTO button during playback.

•AT display on the display panel of this unit disappears and auto tracking is disengaged.

•Pressing it again returns to the auto tracking mode.

2.Adjust with the TRACKING–/+ button.

When noise appears during still picture/slow- motion playback

1.Press PAUSE/STILL button for longer than 2 seconds to perform slow-motion playback.

2.Adjust with the TRACKING–/+ button.

•Tracking adjustment may not be entirely effective when playing back a tape with a poor quality recording.

To adjust the picture when the color phase shifts from side to side during playback

When the color phase shifts toward the left, set the Y/C TIMING switch to "R".

When the color phase shifts toward the right, set the Y/C TIMING switch to "L".

Normally set to "C".

The Y/C TIMING switch has no effect when 629TBC is set to "OFF".

23