JVC manual Tape Dubbing, When Playing Back on SR-W5U and Recording on Another Unit

7 TAPE DUBBING

When Playing Back on SR-W5U and Recording on Another Unit

		Audio output
		To video input connector
MAX	120V	S Video (Video) output
AC	AC
OUTPUT	INTPUT
(100W )	60Hz
	LINE 1	LINE 1

	LINE 2	LINE 3		LINE 2
R	L	VIDEO S	R	L	VIDEO	S		R.A. EDIT
	INPUT			OUTPUT				PRE ROLL
								REMOTE
AUDIO IN		HD VIDEO IN			AUDIO OUT3		HD VIDEO OUT1		HD VIDEO OUT2
R	L	Y	PB	PR	R	L	Y	PB	PR
HD/S3(W-VHS)		HD(CAM/W-VHS)			(HDTV/W-VHS)		HD(HDTV/W-VHS)		RGB(DISPLAY)

To audio input connector

(To HD video/audio input)

PHONES	VOLUME		REC LEVEL	IR REMOTE
			MANUAL	OFF
			AUTO	ON
	MIN	MAX		EDIT(HD REC)
	REMOTE
			NR(W-VHS PLAY)
		PAUSE		TRACKING	AUTO
			INPUT	ON
			LINE4	OFF
VIDEO		L– AUDIO –R		Y/C TIMING
				R
				C
				L
				NR

Another unit (as a recording machine)

1Set the recording machine to external input.

2Put the recording to a pause.

SR-W5U (as a playback machine)

3Start playback shortly before the section where you want to PLAY.

•When noise appears during playback with W-VHS tape, set the NR switch to "ON".

Another unit (as a recording machine)

4Start recording at a section of the program you want to dub.

5To finish, press the STOP button. Extra recording can be avoided by stopping the recording machine then the SR-W5U.

SR-W5U (as a playback machine)

6Press the STOP button.

7If the NR switch was set to "ON" in step 3, set it back to "OFF".

●When dubbing a high vision video, use the HD video cable, provided that the recording VCR is equipped with the HD video input and HD audio input connectors.

24