9
2 CONTROLS AND CONNECTORS
Front Panel
OPERATE
HI-FI AUDIO
SELECT
EJECT
BALANCE REC LEVEL
LR010
AUDIO OUT
SELECT
629
TBC
COUNTER
/REMAIN COUNTER
RESET ZERO
SEARCH
MARK ERASE
OPERATE HD SD S-VHS IN — R.A.E. — OUT
REW FF
INDEX SEARCH
INSERT A.DUB
REC SP/EP
HD INPUT R.A.EDIT
IN/OUT
REV
FWD
START
PREROLL EDIT
START
JOG
SHUTTLE
PAUSE
STOP PLAY
PAUSE/STIL
INPUT
SELECT
INDEX
9%^ ) q& * (0 # $!@w e r t
9[OPERATE] button
Turns the power on and off.
0[HI-FI AUDIO SELECT] button
Selects Hi-Fi audio sources to be played back.
Every press of this button changes right and left
audio [ left audio [ right audio one after the
other.
[AUDIO OUT SELECT] button
Selects audio to be played back.
Every press of this button changes Hi-Fi [ Normal,
one after the other.
![629TBC] button
Corrects the distorted or blurred picture with an
S-VHS or VHS tape.
@[INDEX MARK] button
Marks the index signal.
[INDEX ERASE] button
Erases the index signal.
#[OPERATE] lamp
Lights when the power is on.
[HD] lamp
Lights when HD mode is selected with a W-VHS
tape in use or when an HD-recorded tape is played
back.
[SD] lamp
Lights when SD mode is selected with a W-VHS
tape in use or when an SD-recorded tape is played
back.
[S-VHS] lamp
Lights when an S-VHS cassette is loaded and
when an S-VHS-recorded tape is played back or
while recording in the S-VHS mode.
[IN-R.A.E-OUT] lamps
Lights when Random Assemble Editing mode is
selected and when IN/OUT points are set.
$[HD INPUT] button
Input mode will change to HD input mode by
pressing this button when a cassette is not loaded
or when a W-VHS cassette is loaded in this unit.
%[EJECT] button
Ejects a cassette.
^[BALANCE] adjust knob
Adjusts balance between right and left audio
channels.
[REC LEVEL] adjust knob
Adjusts Hi-Fi audio recording level. Carefully adjust
this knob, as a recording level that is too low may
lead to increased noise, and a level that is too high
may cause distortion.
&[COUNTER/REMAIN] button
Alternates the display window between the tape
counter display and the tape remaining time
display.
*[COUNTER RESET] button
Resets the tape counter display to 0:00:00.
([ZERO SEARCH] button
Stops the tape at the position of 0:00:00 on the
display counter.