Installation
MANUAL
AUTO
Fig. 5 – Phone base installation for wall mounting
- OFF |
- ON |
BOOST |
Fig. 6 – Wall mounting installation
3.Using the short modular cord, mount the phone as shown in figure 6.
4.Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have pulse rotary) dialing.
5.Connect the handset cord to the telephone as shown in figure 3.
6.Lift the handset and listen for a dial tone.
7.Your P300 phone is ready for use.
C. Battery Installation
An optional 9 volt battery may be installed to brighten the visual ringer. To open battery compartment, use a pen to press down as indicated in figure 7A.
Insert 9V battery into compartment in base of phone
to access battery
compartment 
Battery compartment
Press here to open battery compartment
Fig. 7A – Battery installation
11
