Clarity manual XLC2 Technical Information

XLC2 Troubleshooting

Phone Will Not Hold Charge

•Make sure the charging contacts on the handset and base are free of dust and dirt.

•Clean the battery contact with a cloth moistened with alcohol.

•Make sure CHARGE LED on the base is lit when the handset is in the cradle. If necessary, replace the handset batteries. (See Battery Information.)

Difficulty in Placing or Receiving Calls

•Check the visual ringer and/or other buttons for different blinking lighting patterns - see above examples.

•Make sure you have selected the correct dialing mode, tone or pulse.

•Disconnect the base for 5-10 seconds, then reconnect. Place the handset back on the base and reinsert the AC adapter.

•Make sure the handset batteries are fully charged.

Unable To Access Automated Systems

Automated systems used by banks, long distance voicemail and other applications require that a phone be set to TONE dialing. Check the switch on the bottom of the phone labeled TONE / PULSE and set to TONE.This will enable the phone to be compatible with these automated systems.

Poor Audio Quality

The base may be too close to electrical appliances, reinforced concrete walls or metal door frames. Place the base away from any electrical appliances.

XLC2 Technical Information
	E
Amplified dB Level: 50dB	N
	G
Dimensions	L
	I
• Handset Size: 7.4” x 2.3” x 1 .7” (H x W x D)
	S
• Base Size: 5.3” x 4.5” x 3.6” (H x W x D)
	H

Weight

•Handset (no batteries): 6.35 oz.

•Base: 7 oz.

•Wall mount bracket: 1.16 oz.

•Batteries (handset only): 1.23 oz.

Power Specifications

AC Adapter:

•Input: 100V-240V AC

•Output: 7.5VDC, 500 mA; Model T07505U002

Battery: 1.2V 600mAh Ni-MH, 60AAAHC, GPI International Ltd.

Talk time: 6.5 hours (handset batteries - 600mAh)

Standby time: 130 hours (handset batteries - 600mAh)

26 27