XLC3.1 OPERATING INSTRUCTIONS
REGISTERING THE XLC3.1
XLC3.1 TROUBLESHOOTING
The unit will not operate/no dial tone:
E
Handset
Needs
Registration
Hold Base
FIND Key
For 5 Secs
Registering...
Registration Successful
Register
Auto Talk
Voice Asst
Register
Register
Deregister
Register
Register
Deregister
HANDSET 1 Deregistered
The XLC3.1 is compatible to the XLC3.4. In order to use the XLC3.1, you must register it to a XLC3.4 telephone.
Pull the handset’s battery tab located on the bottom of the device, and then press MENU to start registering or deregistering your handset from your system.
TO REGISTER AN UNREGISTERED HANDSET
1.Press MENU to enter registration mode.You will see displayed on the screen,“Handset Needs Registration.”
2.Press and hold the FIND key on the XLC3.4 base for five seconds, until the base visual ringer starts flashing. Release FIND key on the XLC3.4 base.
3.Press MENU key on the handset.
4.The screen shows “Registering... ”, then “Registration Successful” (accompanied by five quick beeps).
5.Your handset is now registered to your XLC3.4 system. Your screen will display “Handset X,” (where “X” is the number of the actual handset registered, such as the second or fourth handset, etc.).
You can extend the number of handsets by using additional XLC3.1 handsets (sold separately).
TO REGISTERYOUR HANDSET AGAIN (or to register to a different XLC3.4 system)
1.In standby mode, press MENU.
2.Press DOWN arrow five times to advance the row reading “Phone Setup” to the top of the screen.
3.Press MENU to enter the setup section.The screen displays “Register” on the screen’s top row now.
4.Press MENU to enter the Registration section.
5.Press MENU again to select “Register.”
6.Follow the Registration steps listed above.
TO DEREGISTER THE HANDSET
1.See the six steps listed above, then press MENU to select “Deregister.”
2.Your handset will deregister from your base as soon as you press MENU.The screen will show “Handset X Deregistered”(again, where “X” is the number of the handset registered), then “Handset Needs Registration.”
•Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone.
•Make sure the battery has been placed in the battery compartment correctly. (The circular metal contacts on battery need to touch the metal springs inside battery compartment.)
•Make sure the handset battery is fully charged.
•Verify the telephone is in the correct dialing mode: tone (touch) or pulse (rotary).
•Make sure you are in the usable range of the base station.
The phone does not ring when you receive a call:
•Make sure the RINGER switch on the handset is set to ON.
•Verify the AC Adapter is securely plugged into the AC outlet . and the base.
•Verify the telephone line cord is securely plugged into the . wall jack and the telephone.
•Make sure you are within the usable range of the base station.
•You may have too many extensions on your line.Try unplugging . a few devices.
Noise, interference or other calls heard while using the handset:
•Make sure you are within the usable range of the base station.
•Make sure the handset battery is fully charged.
•Try relocating the base unit to another location.
•Make sure the AC Adapter is not plugged into the wall outlet with other appliances.
Phone will not hold charge:
•Make sure the charging contacts on the handset and base . are free of dust and dirt. While unplugged, clean the contacts with a soft cloth.
•Make sure CHARGE LED (light) on the base is lit when the handset is in the cradle.
N G L I S H
10 | 11 |
