Clarity XLC 3.4 manual Party Responsible for Regulatory Compliance

XLC3.4 TECHNICAL SPECIFICATIONS

XLC3.4 REGULATORY COMPLIANCE

General
Model Number:	XLC3.4
Frequency:	1.9GHz DECT6.0
Amplification:	50dB
Handset Unit
Product in Inches:	(L x W x H): 7.25 x 2 x 1.25
Weight in Pounds:	0.5 lb.
Base
Product in Inches:	(L x W x H): 5.3 x 4.5 x 3.6
Weight in Pounds:	0.44 lb.
Power Supply:	AC Adapter: (Input: 100V-240V AC; Output: 7.5VDC, 500
	mA; Model T07505U002)
Additional Handsets
Clarity part number:	XLC3.1

The XLC3.4 will support a maximum of four (4) handsets registered to a base, and three (3) handsets maximum used in the same call.

(Additional Handsets sold separately.)

Battery Information

Battery Type:	1.2V 600mAh Ni-MH, 60AAAHC, GPI International Ltd.
Battery Life Talk Time: 6.5 Hours
Battery Life Standby:	130 Hours

Contact Clarity customer service for information on purchasing additional handsets or replacement battery.

Clarity contact information:

Customer Service: 800-426-3738

Address: 4289 Bonny Oaks Drive

Chattanooga,TN 37406

32

PARTY RESPONSIBLE FOR REGULATORY COMPLIANCE:

Clarity, a Division of

Plantronics, Inc.

4289 Bonny Oaks Drive

Chattanooga,TN 37406

Phone: 800-426-3738

Part 68 of FCC Rules Information

a)This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

b)A plug and jack used to connect this equipment to the premise’s wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.A compliant telephone cord and modular plug, RJ11C USOC, is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

c)The REN is used to determine

the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For

products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX.The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately shown on the label.

d)If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible.Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

e)The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

f)If trouble is experienced with this telephone equipment, for repair or warranty information, please contact Clarity, 800-426-3738. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect

the equipment until the problem is resolved.

g)This telephone equipment is not intended to be repaired and it contains no repairable parts. Opening the

E

N

G

L

I

S

H

33