Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

Frequency response

 

(single-ended)

8 Hz – 20 kHz +0/-0.7dB

 

(balanced)

8 Hz – 20 kHz ±0.1dB

Distortion (THD+noise)

0.0012%

Output voltage (single-ended)

2Vrms

Output voltage (balanced)

4Vrms

Signal-to-noise ratio

110dB typical

Channel separation

better than 112dB

D/A Converter

3 x Cirrus Logic CS4398

Audio sample rate

192kHz

Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video, VCD, SVCD, MP3, AAC, WMA, DTS CD,

 

Audio outputs

DVD-R, DVD+R, DVD-RW, DVD+RW

6 x RCA, 2 x XLR, Coax S/PDIF 1 x RCA,

 

Video outputs

AES/EBU 1 x XLR, Optical 1 x Toslink

HDMI, Component (progressive scan),

 

Internal Scaling

S-Video, Composite

480i (via all video outputs),

 

 

480p (via component and HDMI)

 

Power consumption

720p/1080i/1080p (via HDMI)

72W

Mains voltage

determined by the needs of country for which

 

the unit was manufactured; cannot be reset by dealer or user

Overall dimensions

Width: 17.5” (445mm)

 

 

Depth: 16.5” (419mm)

 

Net weight

Height: 4.75” (121mm)

27 lbs (12.3 kg)

Shipping weight

35 lbs (15.9 kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

41

Page 41
Image 41
Classe Audio CDP-300 owner manual Specifications