Controlling the display
The Omega SACD Player display function can be changed using keys on the remote control as follows:
ON/OFF
Pressing the ON/OFF key will cause the display toggle between ON mode and OFF mode.
In OFF mode, the display will remain off unless a key on the top panel or the remote control is pressed. In ON mode, the display remains illuminated during operation.
TIME
The TIME key changes how the front panel display indicates time. The display can show elapsed time for the current track, time remaining for the current track, or time remaining for the entire disc. Pressing the TIME key scrolls through the three options as shown below:
Programming
Several programming features allow you to listen to tracks in a particular order or repeat tracks. All keys for programming are on the remote control.
SHUFFLE
Press the SHUFFLE key to hear tracks in a random order. Pressing CONTINUE will resume normal playing.
REPEAT
Use the REPEAT key to hear a single track or the entire disc repeated. Pressing REPEAT once will cause the Omega SACD to repeat the entire disc. This is indicated by the word “Repeat” illuminated on the front panel display.
Pressing REPEAT a second time will cause the Omega SACD to repeat the current track. This is indicated by the word “Repeat1” illuminating on the front panel display.
Pressing REPEAT a third time will revert to normal play.
A – B Repeat
This function allows you to repeat one section of a track or disc. Pressing the A – B key on the remote sets the beginning of the section to be repeated.
Pressing the A – B key a second time will set the end point for the repeating section. When the A – B key is pressed the second time, the Omega SACD Player will begin to repeat the selected portion of the disc.
To resume normal play, press REPEAT or STOP.
Creating your own program
To program the Omega SACD to play tracks in a specific order, follow these steps:
1.If the disc is playing, press STOP.
2.Press the PROGRAM key.
3.Use the
If you entered the wrong track, press CLEAR.
4.Enter the next track number in the same manner. Each time you enter a track number, the total program time appears in the display.
5.When you are finished, press PLAY to hear the program.
6.The program will be erased if you turn the AC power off or press the OPEN/CLOSE key.
CHECK
To check the order of the program, use the CHECK key. Each time you press CHECK, the number of the next track in the program appears on the display.
CLEAR
When the player is stopped, you can use the CLEAR key to delete tracks from the program. Press the CHECK key repeatedly until the track number that you want to delete appears on the display, then press CLEAR to delete that track.
Track number and elapsed time of current track
Press TIME
Display:
Track number and remaining time of current track
Press | TIME | Press |
|
|
| |
TIME | ||||||
|
| |||||
Display:
Time remaining on disc
10
