Section 6.0 - USING THE TAPE INPUTS AND OUTPUTS
RECORDING AUDIO/VIDEO, AUDIO ONLY AND DIGITAL AUDIO/VIDEO
The
The SOURCE being played in the Main area appears at the three Record Outputs. All Audio/Video SOURCEs and all Audio SOURCEs appear at all Record outputs, except PLAY.
There is one TOSlink digital audio output. It does not matter which style of Digital input is selected. The data available is the same data as input to the currently accessed digital audio Source. This data can be delivered to and recorded by a digital VCR. Since there is only one Digital output, if you wish to send the data to a recorder and another processor, use the Digital output of the recorder to send the signal to the second processor.
6.1RECORDING AUDIO/VIDEO, ANALOG:
Setup for recording Audio and Video to a
6.1.1DVD B SSP. Use a two channel analog audio cable to connect the analog output (mixed two channel) of the DVD player or Satellite receiver, etc, that you wish to record, to the analog input of the SOURCE the digital input is assigned. This must not be VIDEO 6.
6.1.2DVD B SSP. Use an
NOTE: Component Video does not convert to either of the other formats, so you must connect
6.1.3VCR B SSP. Use a two channel analog audio cable to connect the analog output from your recording component to the VIDEO 6 analog Inputs.
6.1.4SSP B VCR. Use a two channel analog audio cable to connect the VIDEO 6 Record Output connectors of the
6.1.5VCR B SSP. Use an
6.1.6SSP B VCR. Use an
6.1.6.1Follow the usual recording component instructions for recording. The record output at REC, REC1, REC2, always follows the input on VIDEO 1 through VIDEO 5.
25