Classe Audio SSP-30 MKII owner manual 5.4DISPLAY SETUP, Display setup, TV system, Ntsc

5.4DISPLAY SETUP:

These setting are mainly “set and forget”, with the possible exception of OSD output. We have shipped your SSP-30 MKII with the “TV System” set to the correct format. If you are, however, having trouble with the picture it may be that the wrong format is set. It is easy to correct; there are only two formats, NTSC and PAL. Using the display on the front panel of the SSP-30 MKII, navigate to the Display setup screen and change the format to PAL or NTSC, whichever is correct for your TV and DVD player. All video sources and devices used together should have the same format.

Display setup			These displays show that you have accessed the Display setup sub-menu and
			highlighted TV System. You can scan through the		available choices by pressing
	TV system	NTSC
			repeatedly the \/ and /\ buttons on the remote. When the selection you wish to
	Superimpose	On
	Temporary disp.	Full	adjust is highlighted press the < or > key to scroll through the choices. To memorize
	Video format	Auto	and Exit highlight Exit and press the ENTER key.
	OSD output	Both
	Distance unit	Meters
				Display setup
	OSD style	1
	Exit			TV system:	NTSC
				Panel display
	TV Display

5.4.1TV System: Use < or > to switch between NTSC and PAL.

5.4.2Superimpose: Use < or > to change. “On” superimposes only words over the TV picture, while “Off” allows the OSD to completely replace the TV picture.

5.4.3Temp. Display controls how long any On Screen Display remains present. Use < or > to change. It is possible to set the parameter to “Full”, (on all the time), “Simple”, (which keeps it on for a few seconds or “Off”, which prevents OSD entirely.

5.4.4Video Format can be set to S-Video output or Composite, or Auto. Auto automatically selects the best source present. Use < or > to change.

5.4.5OSD Output Use < or > to change. OSD can be applied to the Composite, or S-Video Monitor outputs, or both, or it may be switched Off. OSD can not be turned on for the “No OSD” outputs.

5.4.6OSD style changes the screen and text color if Superimpose is switched Off.

5.4.7Distance unit is setup in feet or meters for use in the Delay Setup menu.

5.4.8Exit returns to the Main Menu, press ENTER when Exit is highlighted.

23