Secure Fabric Cab Skin to Frame (fig. 9)
13.Find the large fabric strap sewn into the bottom rear area of the fabric cab skin. Pull the strap down and over the end of both mounting bar ends [C1, C2]. (Fig. 9) Find all rip and grip tabs on the inside of the cab skin and secure the skin to the frame.
Note: If it is very difficult to secure straps over the mounting bar ends, make sure that all rip and grip tabs are loose and that the skin is fitted correctly.
Secure Pockets to cab skin and Frame (fig. 10)
14.Find the two sand/salt pouches [R1, R2] and the mesh garage door opener holder [S]. Secure the large pouches to the top arch of the mounting bar ends using the rip and grip strips. On the left side of the inside of the fabric skin there is a loose fabric gusset. Secure the garage door opener holder to the gusset with rip and grip strips. (Fig. 10)
Fig. 9
Fig. 10
9
