Connecting to a digital phone line

6		Getting Started

If you have digital (PBX) telephone service, you will need a digital-to-analog tele- phone line converter. For more information, contact ClearOne technical support.

Phone Jack

Electrical

Outlet

	Digital, PBX,
	or Multi-line phone
	AC Adapter
	KONEXX KONFERENCE
	Digital-to-Analog
	Converter
Base Unit	Handset
	Handset

Figure 5. Connecting the base unit to digital-to-analog converter

1.Connect one end of the telephone cable into the phone jack on the back of the base unit and the other end into the digital-to-analog converter.

2.Connect the converter's power adapter into an electrical outlet.

3.Connect a second telephone cable from the converter to a digital or PBX phone. Consult the converter user manual for more information.

4.Plug the base unit into an electrical outlet. The base unit may be located up to 150 feet/45.7 meters from the conferencing pod.

Using your Max Wireless conferencing phone

To make a call

1.Press the ON/OFF key. You will hear a dial tone.

2.Dial the number as you would on a standard phone. The number is displayed on the LCD screen.

Phone icon

	Call timer	Approximate
		talk-time remaining
	Figure 6. LCD screens	talk-time remaining
	Figure 6. LCD screens

Getting Started		7

You can also predial the number while in Standby (inactive) mode and press the ON/OFF key to connect the call. Press and hold the pound key (#) to enter a pause in

the dialing string.

Elapsed time is shown in minutes and seconds until one hour passes.Then elapsed time is shown in hours and minutes.

To answer a call

•Press any key (except the star “*” key, MUTE, VOLUME UP or VOLUME DOWN) on the keypad to answer the call. When there is an incoming call, the phone rings and the LEDs on the phone and the phone icon on the LCD screen flash.

Phone icon

Figure 7. Incoming call

To end a call

•Press the ON/OFF key. This will disconnect the call and return the phone to Standby mode.

To redial a number

1.Press the ON/OFF key. You will hear a dial tone.

2.Press REDIAL to dial the last number called.

You can also press REDIAL while in Standby mode to display the last number called. To connect the call, press the ON/OFF key.

To adjust ringer volume

•While the phone is ringing, press VOLUME UP or VOLUME DOWN.

•While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody will play once at the new level.

To mute the call

•Press MUTE to mute the call.

•Press again to unmute.

To make a call using the Phonebook

1.Press the ON/OFF key. You will hear a dial tone.

2.Press PHONEBOOK.

3.Press the number key (0-9) that corresponds with the location of the stored phone number you want to dial. This feature must be programmed before use. See page 8.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

ClearOne comm Max Wireless Connecting to a digital phone line, To make a call, To answer a call

Models: Max Wireless