CONVERGE PA 4160 DATA SHEET <
> CONVERGE PA 4160 BACK PANEL
> SPECIFICATIONS
Power
120 VAC; 60 Hz, 5.0 Amp max
Audio Performance
Conditions: Unless otherwise specified, all measurements are performed at 1 watt with a 1 kHz signal.
Line Inputs
Connectors: XLR Balanced
Frequency Response: 20 HZ - 20 kHz
Maximum Input Level: 15 dBu
Impedance: 10 KΩ
Outputs
Amplifier Output:
Frequency Response: 20 HZ - 20 kHz
Channels:
Connectors: Binding Post or SpeakOn®
Impedance: 8 Ω
THD+N <.05% at 1 Watt
SMPTE IMD <.1% from 60 HZ to 7 kHz
Dynamic Range >100 dB
Damping Factor: 220
Crosstalk >65 dB
Protection Features
Thermal Shutdown
Current Limiting
Other
Bridgeable Outputs
Parallel or Stereo Impedance Switch
Clip, Presence, Fault Indicators
Front Panel Gain Controls
Front Panel On/Off Switch
240 VAC; 50 Hz 2.5 Amp max
Operating Temperature
75 C° ambient unit temperature
Humidity
15 to 80%
Dimensions (L x D x H)
18.89” x 18.58” x 3.46” (2 RU) 47.98 x 47.19 x 8.78 cm
Weight
40.8 lbs/18.5 kg unit weight
Compliance
FCC Part 15 Subpart B
EN
EN 60065
RoHS
WEEE
Part Number
> CLEARONE LOCATIONS |
|
|
|
|
|
|
|
|
|
|
|
Headquarters: | Latin America | EMEA | APAC |
| |
Salt Lake City, UT USA | Tel: | Tel: 44 (0) 1189 036 053 | Tel: | Tel: | |
5225 Wiley Post Way | global@clearone.com | global@clearone.com | global@clearone.com | techsupport.apac@clearone.com |
Suite 500
Salt Lake City, UT 84116 Tel:
Toll Free:
Fax:
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice. © 2008 ClearOne Communications Inc.