ClearSounds CL600 manual Making a Call, Neckloop Jack or Headset Jack, Receiving/Answering a Call

Audio Jack	Telephone
(only)	headset	DIAGRAM #21
	Jack
		Audio & Telephone Headset Jack Location

Making A Call:

1.Plug your Neckloop, Headphones, Headset or other jack accessory into the Audio/

Neckloop Jack or Headset Jack.

2.Press the (headset) button for dial tone (See diagram #22).

3.Dial the number and wait for someone to answer.

a.If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the handset, lift the handset and speak into it. Adjust your volume. On completion of the call, carefully replace the handset in the cradle.

b.If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the speakerphone, press the “SPKR” speakerphone button for hands-free opera- tion, and talk into the speakerphone (the conversation will be heard through both your audio equipment and over the speakerphone). Adjust your volume. On completion of the call, press the “SPKR” speakerphone button.

c.If you are using the 2.5mm Headset Jack for hands-free communication, leave the handset in the cradle, and talk into the headset microphone. Adjust your volume. On completion of the call press the headset button.

DIAGRAM #22 – Audio / Headset Jack Button

Receiving/Answering A Call:

1.Plug your accessory into the Audio/Neckloop Jack or Headset Jack.

2.If using the audio jack, press the “SPKR” or lift handset.

3.If using the headset jack, press the (headset) button while the phone is ringing to answer the call.

4.Depending whether you are using the 3.5mm Audio/Neckloop Jack or 2.5mm Telephone Headset Jack follow the directions above (A, B or C)

22