ClearSounds CST25 user manual Digits Dial

Models: CST25

1 70
Download 70 pages 62.19 Kb
Page 8
Image 8
#00
_ _ _
ENTER AREA CODE 7 DIGITS DIAL
#00
3 0 3
ENTER AREA CODE 7 DIGITS DIAL
#00
_ _ _ - _ _ _ - _ _ _
ENTER AREA CODE 10 DIGITS DIAL
#00
7 2 0
ENTER AREA CODE 10 DIGITS DIAL

5. Program your area code

(A) After selecting the language, the display flashes "ENTER AREA CODE" and “7

DIGITS DIAL”.

(B) If you dial your local calls using 7 digits (e.g., 555- 1212), then enter your local area code, press the Dial button, and go to Step C.

If you dial your local calls using 10 digits (e.g., 303- 555-1212), then enter “000” as the area code for 7 digits dial, and press the Dial button to go to Step C.

(C) The display flashes “ENTER AREA CODE” and “10

DIGITS DIAL”.

Enter the area code(s) for numbers that you dial using ten digits (e.g., 720-555-1234). You can store up to three area codes for ten-digit dialing. Press Dial when you are done. If there is no number you dial using ten digits, then press Dial.

6. Press the Save button to save these operating settings.

After installation, lift the telephone's Handset and listen for the dial tone. If there is no dial tone, check to make sure all cords are firmly plugged into their jacks.

Note: Programming your area code will allow you to easily

dial numbers that are in your CALLER ID list. See the Section “Calling Back a Number from the CALLER ID List” for more information on dialing calls from your CALLER ID list.

Page 5

Page 8
Image 8
ClearSounds CST25 user manual Digits Dial