ClearSounds CST25 user manual Storing a New Number and Name in the Memory Buttons

Storing a New Number and Name in the Memory Buttons

To store a new number and name in the memory buttons:

1.Press the Save button when the display shows no caller’s number or name. The “SAVE TO?” prompt appears on the display.

2.Press the memory button where you wish to store this telephone number (e.g., M1). The “ENTER NUMBER>“ prompt appears on the display.

3.Use the keypad to enter the telephone number,

including the long distance prefix that you need to dial this number. Insert a pause or multiple pauses where required by using the Pause button. Then press the Save button.

4.The display will read “PROGRAMMING OK!”.

SAVE TO?

#00

ENTER NUMBER>

#00

8009659043

USE SAVE TO END

Copying the Caller’s Number and Name to a Memory Button

When the caller’s number and name you wish to store in a memory button is displayed during CALLER ID review, press the Save button. The 3rd line of the display indicates “SAVE TO?”.

You can save this caller’s number and name into a memory button by pressing the desired memory button (e.g., M1). The display will read “PROGRAMMING OK!”.

#25

800-965-9043 ClearSounds

SAVE TO?

Page 10