Cleveland Range 1SCE Cleveland Range, Inc, Heat-On LED Indicator Elements, Cooking Mode Operation

V.SteamCub®: Operating Controls

Heat-On LED Indicator: Elements

are on when illuminated

Time/Temperature Display

Time Set Controls: 10 minute, 1 minute or 10 second increments

Cooking Mode Operation:

Constant Steam: Continuous steaming

Steam/Hold: Steam cooking mode followed by a holding mode after steam mode timer is completed

Hold Only: Hold Cycle mode only

Start: Cooking Cycle Start Button

Temp. Display: Compartment Temperature Display

Stop: Cooking Cycle Stop Button

Main Power ON/OFF Switch

Serial Number/Model Number Display

IMPORTANT OPERATION INFORMATION

Constant Steam Mode: Continuous steaming, not necessary to use the timer. Display will read ”cont” when using this mode. Cooking temperature is pre-set.

Steam & Hold Mode: Steam cooking using the timer settings, after the timer has counted down, unit will automatically go into the “Hold Mode”. Steaming and Holding cycle temperatures are pre-set.

*** Note: the “10 Sec. Digit” will continuously count-down until cooking temperature is reached (during defrosting cycle), then the timers begins to count-down cycle.

Hold Mode: Continuous holding cycle, temperature pre-set at 160°F. (71°C.) Not necessary to use the timer. Display will read “hold” when using this mode.

***Hold down push buttons for 3 seconds when stopping or changing cooking modes.

Cleveland Range, Inc.	1333 East 179th St., Cleveland Ohio, U.S.A. 44110
Ph: 1-216-481-4900 Fx: 1-216-481-3782	Visit our Web Site at www.clevelandrange.com