CLO Systems LVM-601-2 manual Assembly

Assembly

Before you start, make sure that you have the following tools available:

Drilling machine, drills, Philips 2 Screwdriver, (Pozidrive 2 Screwdriver), water level, wrench (or 8 & 10mm fixed tool). Pay attention to electrical screwdriver may not be used when assembly the wall mount.

The wall mount with a TV fitted are rather heavy, so make sure that the wall you intend to mount it on is solid. If not, you have to reinforce the wall with a minimum 15mm plywood board in order to make a safe installation. Pay attention that screws are not included for mounting the bracket in the wall. Screw should have maxi-

mum Ø 6mm, the head should have Ø of 12-16mm. Minimum 150 kg safe working load/ screw!

1. Use the template on back of the gift box to mark the four fixing holes for the mount on the wall. Make sure to align them 100% vertical. Drill the holes and securely fasten the screws. Do not tight them all the way, you will need about 5mm clearance between the head and the wall when you hook the wall mount on the screws. For larger units, or less stable walls, please also drill some of the centre fastening points. (Located close to the actuator bracket).

2. Use the screw that match the size of your TV to fix the U-profiles on the TV as the illustration shows.

3. Fasten the L-profiles and cover plate to the frame. Three screws on each L-profile is minimum. Make sure that you use the self tapping M4 screws as the frame do not have any lead threads.

4. Mount the package to the U-profiles fastened on the TV.

Pay attention to have max 35mm distance between the outer end of mount and TV. If this is more, the mount will not be able to open the full 90 degrees.

X

M4 (4+4+4 pcs)

M5 (4+4+4 pcs)

M6 (4+4+4 pcs)

M8 (4+4+4 pcs)

LVM-601.2 MADE IN SWEDEN English 3