Universal Mounting Bracket Assembly
Step 1. Place the universal bracket bar and the universal brackets on a flat surface.
Step 2. Slide the universal brackets onto the universal bracket bar (as shown in Figure 9) with the set screws facing up. At this time, do not tighten the set screws that are located on the universal bracket.
Step 3. Place the display on a soft, flat surface,
Step 4. Once the desired position has been determined, place the griplates over each mounting point (dimples facing up) and secure them using the appropriate hardware (see Page 5).
Step 5. At this time, center the universal bracket bar and tighten the set screws that are located on the universal brackets.
For the two upper mounting points, the dimples (griplates) must be facing up. For the two lower mounting points, the dimples (griplates) must be facing down.
Dimples
M8
M6
M5
M4
Universal Mounting Bracket
Set Screw |
|
|
| Set Screw |
|
|
Griplate | Display | Universal Bracket | Griplate |
|
| Bar |
|
|
| Figure 9 |
|
Page 10 | Installation Instructions |