Tilt Positioning
To adjust the display, loosen the tension bolts no more than ½ turn, make the adjustments and then tighten the tension bolts.
When tilt positioning is needed to adjust the display, place a hand at the top corner of the display and the other hand at the bottom of the display (Figure 15).
To Tilt the Display
Gently push both hands inward. This motion will cause the display to tilt forward.
To Tilt the Display Back
Gently push both hands outward. This motion will cause the display to tilt forward.
Tilt/Pivot Point | Figure 15 |
Cable Access Holes
Once the display has been mounted and adjusted, route the cables through the cable access holes and to their respective locations (Figure 16).
Cable Access Holes
Figure 16
Installation Instructions | Page 13 |
