CLO Systems LVM-601-2 manual Operation, Specifications, LVM-601.2, Learning, Using

Models: LVM-601-2

1 14
Download 14 pages 20.64 Kb
Page 6
Image 6
Operation

Operation

!Even though this decvice is designed to handle most of the remote formats on the market, some may not work. In this case try another one, or use the enclosed remote.

Learning

The learnable wallmount receiver is pre-programmed to operate with the late edition of Lava Chameleon and Khor series remote controls. If you do not have such TV, please use the en- closed remote (which also can be used to operate the most common functions on the above mentiond Lava models). You can also learn the receiver to operate from one of your existing remotes, for example your TV control. Here is how you do:

Note! It is neccessary that you wait for at least 1 sec. between pressing the keys when programming.

1.Flip the switch to ”Learn Motor 1” mode.

2.Press and hold for 2 sec the button on your remote that you want to use for out operation.

3.Release the button, and led flashes red.

4.Press and hold the same button again for 2 sec.

5.Release the button, and the led is green.

6.Press and hold for 2 sec the button on your remote that you want to use for in operation.

7.Release the button, and led flashes green.

8.Press and hold the same button again for 2 sec.

9.Release, and the led turns off.

10.Learning completed, flip the switch back to ”Operate Mode” and you can start to use.

The central unit has beside learning and operate mode also a ”Lock” function which if it is switched on, disables all functions. This can be used in public places or to prevent children from using the device

Using

The in and out function have a 1sec delay in order to avoid any accidental use. Press and hold the button on your remote, and the wall mount starts to move after 1sec. Release the button, and the mount stops and locks in that position.

Specifications

Operation Voltage: 100-240VAC, Secondary 12VDC 2A

Max weight on TV at wall installation 50kg

Max weight on TV at ceiling installation: 13kg. This can be increased if the powersupply is replaced. Contact your dealer.

Dimensions on TV at wall installation: Width: 700-1300mm Height: 430-∞mm

Dimensions on TV at ceiling installation: Width: 420-∞mm Height: 400-470mm

Fits wall mount screw location on TV: Width: 50-668mm Height: 50-400mm
* For illustration of details, look at the rear of this User manual.

6 English

MADE IN SWEDEN

LVM-601.2

Page 6
Image 6
CLO Systems LVM-601-2 Operation, Specifications, LVM-601.2, Learning, Using, Max weight on TV at wall installation 50kg