Stand-alone DVR Instruction Manual
8-3. Internet Explorer
When you are trying to use this function, it is highly recommended that the password should
be turned ON in the SYSTEM menu not to enable unauthorized personnel to access your
DVR system (See section 7-2.3).
Up to 10 users can remotely access your DVR with the HOST NAME.
How to setup the Internet Explorer
• Registration to the www.dyndns.org (See section 7-7.6 on page 122).
• In the IP address box of Microsoft Internet Explorer, type the HOSET NAME (See Fig.8-
2) you entered in the DDNS menu and the PORT NUMBER of the DVR, and then you will
be asked to install the AciveX control software (See Fig.8-3). You should type the
protocol (http://), the host name (example: clov erdvr1.dyndns.org) and the port
number (:5800) in the IP Address box as follows.
[Fig.8-2 Host Name]
[Fig.8-3 SmViewer- Windows Internet Explorer]
132