MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
54
8.1.1. AUTO SEQUENCE CDR0460 (4channel)
At the SCREEN menu,
Double-click AUTO SEQUENCE or highlight AUTO
SEQUENCE and then press the ENTER button and
the AUTO SEQUENCE menu will be displayed like the
left picture.
Define the display duration from 0 to 10 seconds. 0
seconds disables the specific display mode’s inclusion
in the sequence. The default is 2 seconds.
Change the value by clicking the left button of the
mouse on each value.
CDR0860 /CDR1660 (8channel /16channel)
In case of using the remote controller or the front
panel buttons, move the cursor to the desired item
using the ▲,▼ buttons and press the ENTER button
and then select the desired value using the ◀, ▶
buttons and press the ENTER button.
To exit the AUTO SEQUENCE menu, click the X
button or press the ESC button of the remote
controller or the front panel.
* ADD AUTO SINGLE:
Select the inclusion of single channels in the
automatic sequence.
The default is off.
8.1.2. DISPLAY At the SCREEN menu,
Double-click DISPLAY or highlight DISPLAY and then
press the ENTER button and the DISPLAY menu will
be displayed like the left picture.
Click the X button or press the ESC button to exit from
this screen.
8.1.2.1. HDD FREE SPACE
Select the display option for the remaining space on the hard disk drive. The default is ON.
Click the left button of the mouse on the value. Or in case of using the remote controller or the
front panel buttons, highlight HDD FREE SPACE using the ▲,▼ buttons and press the ENTER
button and then move the cursor to the desired value(ON or OFF) and press the ENTER button.
ON: Remaining capacity of the fixed HDDs will be displayed on the screen.