MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
64
8.2.1.2. RECORDING SPEED (FRAMES PER SECOND)
This allows the user to configure the recording speed (FPS) for each channel.
Click the F/S button of the desired channel in the
RECORDING SETUP menu and select one of the
recording speed among 1, 2, 4, 5, 6, 8, 10, 15, 30 and
OFF on the pop-up window by clicking the mouse.
Or in case of using the remote controller or the front
panel buttons, highlight the F/S button to be changed
using the ▲,▼,◀, ▶ buttons and press the ENTER
button and then select the desired value on the pop-up
window using the ▲,▼,◀, ▶ buttons and press the
ENTER button.
NOTE:
You can see the used frames and the remained frames
on the above window according to setting.
If the entire sum has been exceeded in the middle
choice of the F/S, is not a choice.
* Maximum recording rate per resolution
Model D1 Half D1 CIF
CDR0460 (4channel) 60fps 120fps 120fps
CDR0860 (8channel) 60fps 120fps 240fps
CDR1660 (16channel) 60fps 120fps 240fps
8.2.1.3. QUALITY
Defines the record quality of each channel. There are 4 quality levels, LOW, NORMAL, FINE and
BEST.
Click the QUALITY button of the desired channel in
the RECORDING SETUP menu and select one of the
recording qualities among LOW, NORMAL, FINE and
BEST on the pop-up window by clicking the mouse.
Or in case of using the remote controller or the front
panel buttons, highlight the QUALITY button to be
changed using the ▲,▼,◀, ▶ buttons and press the
ENTER button and then select the desired value on
the pop-up window using the ▲,▼,◀, ▶ buttons and
press the ENTER button.