Clover Electronics CDR0460, CDR0860, CDR1660

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

8.2.1.4. SCHEDULE RECORDING

User can set the SCHEDULE recording of each

Channel.

Click the SCHEDULE ( ) button of the desired

channel in the RECORDING SETUP menu and you

can see the SCHEDULE menu like the left picture.

Or in case of using the remote controller or the front

panel buttons, highlight the SCHEDULE ( )

button of the desired channel using the ▲,▼,◀, ▶

buttons and press the ENTER button.

User can set the SCHEDULE RECORDING to either

“ON” or “OFF” by clicking the left button of the mouse.

Or in case of using the remote controller of the front panel buttons, highlight SCHEDULE

RECORDING and press the ENTER button and then move the cursor to the desired value using

the ▲, ▼ buttons and press the ENTER button. If you set the schedule recording to ON, the

SCHEDULE ( ) button will be displayed by “O” and in case of OFF, the SCHEDULE

() button will be displayed by “X” in the RECORDING SETUP. The default is OFF.

User can schedule the WEEKDAY, SATURDAY and SUNDAY recording by clicking each hour bar

or moving the cursor using the ▲,▼,◀, ▶ buttons and pressing the ENTER button. The

selected hour will be displayed in red.

The default is OFF.

Click the X button or press the ESC button to exit from this screen.

8.2.1.5. MOTION RECORDING

User can set the MOTION RECORDING of each Channel.

Click the MOTION ( ) button of the desired

channel in the RECORDING SETUP menu and you

can see the MOTION menu like the left picture. Or in

case of using the remote controller or the front panel

buttons, highlight the MOTION ( ) button of the

desired channel using the ▲,▼,◀, ▶buttons and

press the ENTER button.

Click the X button or press the ESC button to exit from

this screen.

8.2.1.5.1. MOTION RECORDING

Select the MOTION RECORDING to either “ON” or “OFF” by clicking the left button of the mouse.

Or in case of using the remote controller or the front panel buttons, highlight MOTION

RECORDING and press the ENTER button and then move the cursor to the desired value using

the ▲, ▼ buttons and press the ENTER button. If you set the motion recording to ON, the

MOTION ( ) button will be displayed by “O” and in case of OFF, the MOTION ( )

button will be displayed by “X” in the RECORDING SETUP. The default is ON.

Click the button in the RECORDING SETUP menu to enable or disable all channels.