Getting Started
2.2.4. Installers Checklist
Glasswasher checked for concealed damage
Hot water supply is recommended 140° F (60 C)
Incoming water supply line is ½” minimum
Supply circuit breaker for machine is properly sized (20 amp) Service voltage and phase type are correct to machine data plate Drain hose is installed with adequate air gap
Glasswasher is properly grounded
Glasswasher is properly leveled
Machine circuit breaker is labeled “GLASSWASHER”
Machine has been connected with correctly sized wire (To handle 20 amp)
MODEL | 7 |
PAGE |
