Maintenance
PROBLEM
LIKELY CAUSE
SOLUTION
Low heat during operation | Low incoming water temperature | Turn up supply water heater | |
| (below 140° F) |
| |
| Insulate supply water pipe | ||
| Thermostat out of adjustment | Adjust thermostat | |
| Defective sustainer heater | Replace heater | |
|
| P/N: 04109.10 | |
Low spray arm water flow | Limed up spray arm nozzles | ||
With power on, activating | Defective fill/start switch (cycle | Replace fill/start switch | |
start switch does not begin | light will not light either) | P/N: 03470.01 | |
cycle |
|
| |
Defective timer assembly | Replace timer assembly* | ||
| |||
| (Cam 1) | P/N: 00408.80 | |
|
|
| |
Start switch requires more | Defective (Instant Start) ice cube | Replace ice cube relay | |
than | relay | P/N: 00631.00 | |
run cycle |
|
| |
Activating fill switch does | Defective fill/start switch | Replace fill/start switch | |
not fill machine |
| P/N: 03470.01 | |
| Defective water solenoid valve | Replace water solenoid valve | |
|
| P/N: 03603.10 | |
Fill water won’t shut off | Defective water solenoid valve | Replace water solenoid valve | |
|
| P/N: 03603.10 | |
| Defective fill/start switch | Replace fill/start switch | |
|
| P/N: 03470.01 | |
| Defective timer assembly | Replace timer assembly* | |
| (Cam 4) | P/N: 00408.80 | |
Activating drain switch | Drain hose is kinked | ||
does not drain machine |
|
| |
Defective drain switch | Replace drain switch | ||
| |||
|
| P/N: 03406.64 | |
| Defective drain valve motor | Replace drain valve motor | |
| (Pump will still run) | P/N: 04103.21 | |
Detergent pump does not | Defective detergent pump motor | Replace pump motor | |
run |
| P/N: 00416.00 | |
| Defective timer assembly | Replace timer assembly* | |
| (Cam 2) | P/N: 00408.80 | |
Sani pump does not run | Defective sani pump motor | Replace pump motor | |
|
| P/N: 00416.00 | |
| Defective timer assembly | Replace timer assembly* | |
| (Cam 5) | P/N: 00408.80 |
*The timer assembly motor (P/N: 00501.00) or micro switches (P/N: 00411.00) can be replaced independently if that is the only component that has failed.
Rinse pump does not run | Defective rinse pump motor | Replace pump motor |
|
| P/N: 00416.00 |
| Defective timer assembly | Replace timer assembly* |
| (Cam 6) | P/N: 00408.80 |
MODEL | 13 |
PAGE |