Page 22 of 28 9323 Owner’s Manual •
••
• (V 2.1)
Menu Item Format Description Card Name Up to 6 ASCII
This gives the board a
unique name that will
show up in the device list.
Selected Preset Range (1 - 16) Loads parameters
previously saved.
Preset Name Up to 6 ASCII Gives a unique name to
the preset being saved.
Preset Save Confirm
Saves the parameters as
preset selected and preset
name entered.
Preset Load Confirm Loads parameters of
selected preset.
Presets Reset Current
Preset Confirm Will load factory presets
and overwrite the save.
On
AES Pair 1-8 SRC
Bypass
Off
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
On
AES Pair 1-8
Passthrough Off
AES output pair X will
be a low latency copy of
AES input pair X.
On
AES Input Controls AES Pair 1-8
Zero Delay Off
Embeds with low (<1 ms)
latency. Overrides routing
choices.
Video Gain Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain Range 0-2000 Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360 Phase of C (Chroma) in
degrees.
Video Proc Reset to Unity Confirm Resets all of the proc
controls to unity.