InstallOperation
4Connect the red lead of DC power cord to an accessory 12 volt fuse.
5Connect the orange lead to a constant 12v fuse (ie: cigarette lighter or direct to battery)
6Connect the black lead to the negative side of the automobile.This is usually the chassis. Any convenient location with good electrical contact (remove paint) may be used.
7Mount the microphone bracket on right side of the transceiver or near it using two screws sup- plied.When mounting in an automobile, place the bracket under the dash so the microphone is readily accessible.
8Attach the
VOLUME SQUELCH
Mounting and Connections
Note
Before installing the CB radio, visually check the vehicle bat- tery connections to determine which battery terminal, posi- tive or negative (positive is the larger of the two) is grounded to the engine block
(or chassis).
3
