InstallationOperation
Mounting and Connections
Note
The transceiver is held in the universal mounting bracket by two thumb screws, permitting adjustment at the most conve- nient angle.
A universal mounting bracket is supplied along with self tap- ping screws and star washers. To mount the transceiver:
Mounting and Connections
Select a location for the transceiver and micro- phone bracket that is convenient for operation. In automobiles, the transceiver is usually mounted to the underneath of the dash panel, with the microphone bracket beside it.
1Hold the radio with mounting bracket in the exact location desired. Remove the mounting bracket and use it as a template to mark the location for the mounting screws.
CB Transceiver
2Drill necessary holes and secure mounting bracket in location.
3Connect the antenna cable plug to the recepta- cle marked “ANT”on the back of the unit.
EXT. SPKR. | ANTENNA |
POWER |
|
13.8V DC |
|
2
