25 WX NW ST Manual 3.3 6/15/99 1:10 PM Page 24
| Home And Office Setup | Temporary Mobile |
|
|
| ||
|
|
|
|
Base Station
Operation
(From 120V AC
House Current)
Warning!
Do not attempt to operate this transceiver by connecting it directly to 120 vac.
Note
For further information call Cobra Customer Service 1.773.889.3087.
Base Station Operation
(From 120V AC House Current)
To operate your transceiver from home or office you will need a 13.8 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna.
2Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings.
3Connect properly installed and matched base station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want to purchase an optional cigarette lighter adapter from your COBRA dealer. This adapter and a mag- netic mount antenna allow you to quickly “install” your transceiver for temporary use.
Temporary Mobile Set-Up
1Simply connect the red (+) and black
24 | 25 | ||
|
|
|
|
|
|
|
|
|
|
|
|
